高频炉选型常识-中国窑炉信息网

一、透热、焊接类设备 Passes the fever,then welding class equipment

频率在16KHZ左右，可透热Φ80左右工件，可焊接多种硬质合金刀具。

1、标准件、紧固件的热镦。
2、钎钢、钎具是回火、锻造、挤压等的加热。
3、金刚石锯片、钻具的焊接。
4、钎头、煤钻头、铆杆钻头、截齿的焊接。
5、车刀、刨刀、铣刀和各种木工刀具的焊接。

The frequency about 16KHZ the permeabIe feverΦ60 about work Piece,mayweld many kinds of hard aIloy tools

1、the standard Piece.the faslener heat upset
2、drill rod steel，drill rod utensil drawing-back,forge,squeeze the warmup waiting
3、Welding of diamond saw．drilling tool
4、Bit,coal aiguille,rivetting the pole aiguille,welding of the pick
5、Lathetool,planer tool,milling cutter and welding of different woodwork cutters

二、淬火类设备 Quenching class equipment

频率在30KHZ左右，小者可淬Φ10左右高精度小轴，淬硬层保持1.5mm以内，可淬Φ250直径大轴，也可淬Φ500左右齿轮。

1、汽车配件、摩托车配件的淬火处理。
2、机械零件的热处理。如各种齿轮、链轮、各种轴、花健轴、销等的淬火处理。
3、机床行业的机床床面导轨的淬火处理。
4、钳子、扳手、旋具、锤子、斧头等的热处理。

The frequency about 30KHZ small may quench Φ10 about the high accuracy axis,the hard level maintains in 1 mm,may quench ￠250 the diameter macro-axis,also may quench Φ500 about the gear.

1、Quenching of The car fittings，the motorcycle fittings are dealt with
2、Metal parts heat treatment. If each kind of gear,the chain wheel,each kind of axis,the spline shaft,sell and so on quen
ching Processing.
3、Engine bed profession engine bed surface of bed guide rail quenching processing
4、the pliers,the spanner,turn on lathe have,the hammer,the axe Prime heat treatment

三、退火类设备 Annealing class equipment

可对各种机械零件进行整体或局部退火处理。
可对Φ300直径不锈钢容器进行拉伸退火。

May carry on the whole or the spot annealing to each kind of machine parts processes
May carry on the annealing stretch Φ3300 the diameter steel vessel