热处理炉设计中最关键的是工艺参数的保证能力，我们可按照您的工况: ● 采用独有的双脉冲燃烧控制技术，使供热能力调节比≥1：50,实现低温可控，保证炉温均匀性要求。 ● 设计最合理的热工布置方案，达到最佳的热处理效果。 ● 选用最优的炉衬全纤维技术，最大程度减少蓄、散热损失，降低能耗。 ● 选用最可靠的机械传动技术，达到免维护的操作水平。 ● 选用优化的气动压紧密封，杜绝跑火造成烧损设备，而且避免吸冷风， 减少工件氧化。 ● 选用先进的PLC控制，达到精确的集散控制，并可预留L2级网络接口。 Heat treatment furnace design is the most critical process parameters to ensure that capacity, we can according to your conditions: ● the use of a unique dual-pulse combustion control technology to regulate heat capacity ratio ≥ 1:50, the realization of low-temperature controlled to ensure uniform temperature Requirements. ● Design of the most reasonable layout programs thermal, heat treatment to achieve the best results. ● Selection of the best all-fiber lining, with the largest reduction in the degree of heat loss and reduce energy consumption. ● Selection of the most reliable mechanical transmission technology, to achieve the level of maintenance-free operation. ● Selection of optimized compact pneumatic seal, to prevent fire caused by burning equipment running, and avoid cold smoking to reduce the oxidation of the workpiece. ● Selection of advanced PLC control, distributed control to achieve precise, and reserved for the network interface level L2.