加热炉最关键的是节能技术的采用，我们可按照您的工况： ● 可选择采用蓄热式燃烧技术和预热式燃烧技术，使吨钢能耗和钢锭氧化率降到最低。 ● 设计最合理的热工布置方案，达到最佳的加热效果。 ● 选用最优的炉衬全纤维技术，最大程度减少蓄、散热损失，降低能耗。 ● 选用最可靠的机械传动技术，达到免维护的操作水平。 ● 选用优化的气动压紧密封，杜绝跑火造成烧损设备，而且避免吸冷风， 减少工件氧化。 ●选用先进的PLC控制，达到精确的集散控制，并可预留L2级网络接口。 Furnace is the most critical energy-saving technologies, we can according to your conditions: ● Regenerative either pre-combustion technology and combustion technology, energy and steel ingot steel to minimize the oxidation rate. ● Design of the most reasonable layout programs thermal, heating to achieve the best results. ● Selection of the best all-fiber lining, with the largest reduction in the degree of heat loss and reduce energy consumption. ● Selection of the most reliable mechanical transmission technology, to achieve the level of maintenance-free operation. ● Selection of optimized compact pneumatic seal, to prevent fire caused by burning equipment running, and avoid cold smoking to reduce the oxidation of the workpiece. ● Selection of advanced PLC control, distributed control to achieve precise, and reserved for the network interface level L2.